Memorial Day 2024
0" Offset Domiplate™ XL ("Zero Offset Domiplate XL")
The Seneca Woodworking Domiplate XL™ is our best selling fence solution designed for the Festool Domino XL DF 700 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and...
$129.95
10mm Domi-Shim™
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to...
$49.95
3" Space Square
The Seneca Woodworking 3” Space Square is the first in a series of tools that raise the bar on what a precision woodworking square can be! Designed using principles similar to those used in aerospace engineering, this square is lightweight...
$49.95
3/4" Clamp Dog™
The Seneca Woodworking 3/4" Clamp Dog™ bench dog is a combination bench dog and clamp mounting plate designed for workbenches with 3/4" dog holes. The dog portion allows you to take advantage of the grid of holes in your bench to use as...
$39.95
4" Saddle T-Square
The Seneca Woodworking 4" Saddle T-Square is the latest in our line of precision woodworking layout and measuring tools. This 4" long T-Square simplifies laying out tenons, mortises, rabbets, hinge locations and other common layout tasks with a handful of innovative...
$64.95
45 Degree Dock Plate Stop
The Seneca Woodworking 45 degree Dock Plate Stop works with our Dock Plate XL to make mortising 45 degree trim pieces a breeze. This stop is a fixed 45 degree angle and comes in a "right" and "left" version, or...
from $27.95
Battery Wall Mount for Festool 18v Batteries
Rechargeable tools are great until they aren't; If you've got a dead power tool battery then no work is getting done. For years we've been keeping our spare batteries in Systainers, but that can be a hassle when the Systainer...
from $13.95
Clamp Dog™ for Festool MFT Table
The Seneca Woodworking Clamp Dog™ bench dog is a combination bench dog and clamp mounting plate designed for the Festool MFT tables. The dog portion allows you to take advantage of the grid of holes in the MFT to make...
$39.95
Dock Plate XL
The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless. It attaches to both the Festool Domino df 500 and Domino XL df...
from $127.94
Domi-Shim™
**Domi Shims ordered now should begin shipping in mid December** The Seneca Woodworking Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously...
$49.95
Domiplate Offset Shim Soft Case
Keep your Domiplate Offset Shims safe and neatly organized in our soft case! This accordion style case has 3 slots for our sets of 3 shims, but they even have enough space to hold multiple sets of shims!
$14.95
Domiplate™ for 1/2" and 3/4" nominal ply
**Domiplates ordered now should begin shipping in mid December** The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500...
$84.95
$74.95
Domiplate™ for 5/8" and 7/8" thick material
The Domiplate is for the Domino DF500. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for accurate and repeatable mortising of 5/8" or 7/8" thick material by...
$74.95
Imperial Fence Height Gauge V2 for Festool Domino XL
The Seneca Woodworking Imperial Fence Height Gauge Version 2 (V2) for the Domino XL / DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to a variety of imperial dimensions without the need for a separate...
from $34.95
Imperial Offset Shims™ for Domiplate
This set of Imperial Offset Shims™ allows the offset of the Domiplate and Domiplate XL to be changed from 1/32"-7/32" for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $54.95
Imperial Thickness Gauge for Domino DF500
The Seneca Woodworking Imperial Thickness Gauge for the Domino DF500 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than a minute...
$34.95
Imperial Thickness Gauge for Festool Domino XL DF 700
The Seneca Woodworking Imperial Thickness Gauge for the Festool Domino DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than...
$34.95
Imperial Thickness Set for Festool Domino XL DF700
**Imperial Thickness Sets purchased now should begin shipping in mid December** The Seneca Woodworking Imperial Thickness Set for the Festool Domino DF700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a range...
$99.95
Large Dock Plate Stop
The Seneca Woodworking Large Dock Plate Stop Is a larger version of the standard stop that comes with our Dock Plate XL. This stop is both wider and taller than the standard stop, providing a larger surface for referencing workpieces...
$24.95
Mesh Back Trucker Hat
Represent Seneca Woodworking with this awesome Twill Back Trucker Hat!
Embroidered locally in Clarion, PA, USA.
Front: 60% Cotton, 40% Polyester
Back: 100% Polyester
$19.99
Metric Domiplate™ for 12mm and 18mm
The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for the repeatable mortising...
$74.95
Metric Offset Shims™ for Domiplate
This set of Metric Offset Shims allows the offset of the Domiplate and Domiplate XL to be changed from 1-4.5mm for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $27.95
Metric Small Mortise Set
The kit includes our RTS-500 Cutter Adapter for using DF500 cutters on your DF700, along with our 10mm "Domi-Shim™". The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700...
$119.95
Mini Magnetic Square
The Seneca Woodworking Mini Magnetic Square is the second in a series of tools that raise the bar on what a precision woodworking square can be! Designed using principles similar to those used in aerospace engineering, this square is lightweight but...
from $49.95