July 4th 2024
Domiplate™ for 1/2" and 3/4" nominal ply
**Domiplates ordered now should begin shipping in mid December** The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500...
$84.95
$74.95
RTS-500 Cutter Adapter for Festool Domino DF 700
**NOTE: because of high demand Cutter Adapters ordered now should begin shipping in late December-early January** The RTS-500 Cutter Adapter is a precision-machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool...
$69.95
Seneca Woodworking Small Mortise Kit for Festool Domino XL DF700
**NOTE: because of high demand Small Mortise Kits purchased now should begin shipping in mid December** The Seneca Woodworking Small Mortise Kit bundles three of our most popular products together in one convenient kit that allows you to make mortises...
$164.95
Dock Plate XL
The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless. It attaches to both the Festool Domino df 500 and Domino XL df...
from $127.94
Imperial Thickness Gauge for Domino DF500
The Seneca Woodworking Imperial Thickness Gauge for the Domino DF500 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than a minute...
$34.95
Parallel Guide System for Festool and Makita Track Saw Guide Rail (With Incra T-Track)
Improved version 1.1! The Seneca Woodworking Parallel Guide System is a set of precision-machined aluminum components that mount to your track saw guide rail and enable the making of consistent sized repetitive rip cuts. The Parallel Guide System acts as...
$249.95
Clamp Dog™ for Festool MFT Table
The Seneca Woodworking Clamp Dog™ bench dog is a combination bench dog and clamp mounting plate designed for the Festool MFT tables. The dog portion allows you to take advantage of the grid of holes in the MFT to make...
$39.95
Metric Offset Shims™ for Domiplate
This set of Metric Offset Shims allows the offset of the Domiplate and Domiplate XL to be changed from 1-4.5mm for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $27.95
Imperial Thickness Set for Festool Domino XL DF700
**Imperial Thickness Sets purchased now should begin shipping in mid December** The Seneca Woodworking Imperial Thickness Set for the Festool Domino DF700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a range...
$99.95
0" Offset Philip Morley Domiplate™ ("Zero Offset Domiplate")
The Seneca Woodworking Domiplate™ is our best selling fixed fence solution designed for the Festool Domino DF 500 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and...
$74.95
Imperial Offset Shims™ for Domiplate
This set of Imperial Offset Shims™ allows the offset of the Domiplate and Domiplate XL to be changed from 1/32"-7/32" for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $54.95
Seneca Woodworking 20mm Bench Dogs
One of the best ways to locate stock on a Festool MFT table or other work surface is with a set of Dogs! These Seneca Woodworking 20mm Standard Dogs are for use with any bench with 20mm dog holes. These bench...
from $23.95
Domiplate™ for 5/8" and 7/8" thick material
The Domiplate is for the Domino DF500. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for accurate and repeatable mortising of 5/8" or 7/8" thick material by...
$74.95
45 Degree Dock Plate Stop
The Seneca Woodworking 45 degree Dock Plate Stop works with our Dock Plate XL to make mortising 45 degree trim pieces a breeze. This stop is a fixed 45 degree angle and comes in a "right" and "left" version, or...
from $27.95
10mm Domi-Shim™
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to...
$49.95
Imperial Fence Height Gauge V2 for Festool Domino XL
The Seneca Woodworking Imperial Fence Height Gauge Version 2 (V2) for the Domino XL / DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to a variety of imperial dimensions without the need for a separate...
from $34.95
Metric Small Mortise Set
The kit includes our RTS-500 Cutter Adapter for using DF500 cutters on your DF700, along with our 10mm "Domi-Shim™". The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700...
$119.95
Large Dock Plate Stop
The Seneca Woodworking Large Dock Plate Stop Is a larger version of the standard stop that comes with our Dock Plate XL. This stop is both wider and taller than the standard stop, providing a larger surface for referencing workpieces...
$24.95
Domi-Shim™
**Domi Shims ordered now should begin shipping in mid December** The Seneca Woodworking Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously...
$49.95
Mortise Depth Spacer for Domino DF500
The Festool Domino DF 500 is a versatile tool, but occasionally we find that when joining thin stock, the mortise depth limit setting doesn't stop shallow enough. So we created our Mortise Depth Spacers for the Domino DF 500. This...
$29.95
Mortise Center Finders for Festool Domino
Mortise Center Finders are a quick and easy way to find the center of a mortise location so that center point can be used for layout or for transferring mortise locations to another workpiece. Have you ever forgotten to...
$34.95
Parallel Guide System for Festool and Makita Track Saw Guide Rail (Without Incra T-Track)
The Seneca Woodworking Parallel Guide System is a set of precision-machined aluminum components that mount to your track saw guide rail and enable the making of consistent sized repetitive rip cuts. The Parallel Guide System acts as a rip fence/rip guide...
$199.95
Domiplate Offset Shim Soft Case
Keep your Domiplate Offset Shims safe and neatly organized in our soft case! This accordion style case has 3 slots for our sets of 3 shims, but they even have enough space to hold multiple sets of shims!
$14.95
Mortise Depth Spacer for Domino XL DF700
If you use our Small Mortise Kit on the Domino XL DF 700, you've probably noticed that the lowest setting on the Domino XL plunge depth gauge is 15mm. This can be a problem if you're making a mortise in...
$29.95