• Easy Returns
  • Secure Ordering
  • 100% Satisfaction Guarantee
  • Money Back Guarantee
Grid List
0" Offset Domiplate™ XL ("Zero Offset Domiplate XL")
The Seneca Woodworking Domiplate XL™ is our best selling fence solution designed for the Festool Domino XL DF 700 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and...
$129.95
Add to Wish List
0" Offset Philip Morley Domiplate™ ("Zero Offset Domiplate")
The Seneca Woodworking Domiplate™ is our best selling fixed fence solution designed for the Festool Domino DF 500 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and greatly...
$74.95
Add to Wish List
10mm Domi-Shim™
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to...
$49.95
Add to Wish List
3" Space Square
The Seneca Woodworking 3” Space Square is the first in a series of tools that raise the bar on what a precision woodworking square can be!  Designed using principles similar to those used in aerospace engineering, this square is lightweight...
$49.95
Add to Wish List
3/4" Clamp Dog™
The Seneca Woodworking 3/4" Clamp Dog™ bench dog is a combination bench dog and clamp mounting plate designed for workbenches with 3/4" dog holes. The dog portion allows you to take advantage of the grid of holes in your bench to use as...
$39.95
Add to Wish List
4" Saddle T-Square
The Seneca Woodworking 4" Saddle T-Square is the latest in our line of precision woodworking layout and measuring tools. This 4" long T-Square simplifies laying out tenons, mortises, rabbets, hinge locations and other common layout tasks with a handful of innovative...
$64.95
Add to Wish List
40mm Medium Tri-Groove™ Bench Dog
These are a shorter version of our 70mm Tall Bench Dog. The shorter 40mm height provides enough height to locate your guide rail on your MFT table or work surface, while also providing more clearance for the saw motor to...
$26.95
Add to Wish List
45 Degree Dock Plate Stop
The Seneca Woodworking 45 degree Dock Plate Stop works with our Dock Plate XL to make mortising 45 degree trim pieces a breeze. This stop is a fixed 45 degree angle and comes in a "right" and "left" version, or...
from $27.95
70mm Tall Tri-Groove™ Bench Dog
Also sometimes referred to as "rail dogs", these bench dogs are great for positioning your guide rail in preparation to make a cut. Our exclusive Tri-Groove™ feature around the collar makes removing dogs easier from holes that are just a...
$28.95
Add to Wish List
Battery Wall Mount for Festool 18v Batteries
Rechargeable tools are great until they aren't; If you've got a dead power tool battery then no work is getting done. For years we've been keeping our spare batteries in Systainers, but that can be a hassle when the Systainer...
from $13.95
Big Dog Bundle Pack
$171.70 $119.95
Big Dog Bundle Pack
If you use a Festool MFT table or other work surface with 20mm dog holes, you know how versatile it is. That versatility is enhanced by having the right tools, the right clamps, and of course, the right Bench Dogs....
$171.70 $119.95
Add to Wish List
Clamp Dog™ for Festool MFT Table
The Seneca Woodworking Clamp Dog™ bench dog is a combination bench dog and clamp mounting plate designed for the Festool MFT tables. The dog portion allows you to take advantage of the grid of holes in the MFT to make...
$39.95
Add to Wish List
Dock Plate Stop
The Seneca Woodworking Dock Plate Stop works with our Dock Plate XL to accurately locate your workpiece for mortising.  The Dock Plate XL can be used  with up to three stops at a time (one is normally included with the Dock...
$19.95
Add to Wish List
Dock Plate XL
from $89.95
Dock Plate XL
The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless. It attaches to both the Festool Domino df 500 and Domino XL df...
from $127.94
Domi-Shim™
The Seneca Woodworking  Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust...
$49.95
Add to Wish List
Domiplate Foam Storage Insert for Sys 3 Systainer (For Domiplate™ and Domiplate Offset Shims)
Keep your Domiplates protected and organized with our Domiplate Foam Storage Insert! This insert fits any Sys 3 M Systainer and has place to store two Domiplates and multiple sets of Domiplate Offset Shims in their protective storage case.   ...
$39.95
Add to Wish List
Domiplate Offset Shim Soft Case
Keep your Domiplate Offset Shims safe and neatly organized in our soft case! This accordion style case has 3 slots for our sets of 3 shims, but they even have enough space to hold multiple sets of shims!
$14.95
Add to Wish List
Domiplate XL Foam Storage Insert for Sys 3 Systainer (For Domiplate™ XL and Domiplate Offset Shims)
Keep your Domiplate XLs protected and organized with our Domiplate XL Foam Storage Insert! This insert fits any Sys 3 M Systainer and has place to store two Domiplate XLs and multiple sets of Domiplate Offset Shims in their protective...
$39.95
Add to Wish List
Domiplate™ for 1/2" and 3/4" nominal ply
The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500  mortising tool. It allows quick adjustment for the repeatable...
$84.95 $74.95
Add to Wish List
Domiplate™ for 5/8" and 7/8" thick material
The Domiplate is for the Domino DF500.  The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500  mortising tool. It allows quick adjustment for accurate and repeatable mortising of 5/8" or  7/8" thick material by...
$74.95
Add to Wish List
Domiplate™ XL for 1/2" and 3/4" Ply
5/8/24: We expect the Domiplate XL for 1/2" and 3/4" ply to restock early next week (5/13-5/15). Please check back here for further updates regarding availability.  The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE....
from $129.95
Add to Wish List
Domiplate™ XL for 12mm and 18mm ply
5/8/24: We expect the Domiplate XL for 12mm and 18mm ply to restock early next week (5/13-5/15). Please check back here for further updates regarding availability.  The Domiplate XL is for the Domino XL DF700. For the DF500 version, click...
from $129.95
Add to Wish List
Grip Dog Bundle Pack
$119.80 $89.85
Grip Dog Bundle Pack
Contains 8 of our Small Rubber Grip - Nonskid Bench Dogs and 8 of our Large Rubber Grip - Nonskid Bench Dogs. The Seneca Woodworking Grip Dogs are bench dogs for 20mm dog holes that have a few tricks up their sleeve:  This...
$119.80 $89.85
Add to Wish List
Grip Dog Large - Nonskid Bench Dog
For a limited time all our new Dogs are available in Discounted sets.  Click HERE for the best deal we've ever offered... The Seneca Woodworking Grip Dog (Large) is a bench dog for 20mm dog holes that has a few tricks up its...
$34.95
Add to Wish List

Showing: 1 - 24 of 61

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered