Seneca Products
10mm Domi-Shim™
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to...
$36.95
3" Space Square
The Seneca Woodworking 3” Space Square is the first in a series of tools that raise the bar on what a precision woodworking square can be! Designed using principles similar to those used in aerospace engineering, this square is lightweight...
$49.95
$44.95
Clamp Dog™ for Festool MFT Table
The Seneca Woodworking Clamp Dog™ bench dog is a combination bench dog and clamp mounting plate designed for the Festool MFT tables. The dog portion allows you to take advantage of the grid of holes in the MFT to make...
$39.95
$34.95
Collector's Edition Zombie-Green Battleworn Domiplate™ - October 2019 Edition
For years, Black hard coat anodize has been our finish of choice for the Domiplate™, but we decided to switch things up a bit for this limited edition batch! We had a limited edition batch of Domiplates finished in Zombie...
$119.95
$99.95
Color Changing "Domino DF500" Style Acrylic Sign
Deck out your shop or home with this piece of powertool art! This laser cut acrylic sign resembles a Festool Domino DF500 and stands approximately 5.5" tall and 11" wide. The LED lights in the base can cycle through seven...
$39.95
$34.95
Color Changing "Domino XL" Style Acrylic Sign
Deck out your shop or home with this piece of powertool art! This laser cut acrylic sign resembles a Festool Domino XL and stands approximately 8" tall and 8" wide. The LED lights in the base can cycle...
$39.95
$34.95
Color Changing "Festool Sander" Style Acrylic Sign
Deck out your shop or home with this piece of powertool art! This laser cut acrylic sign resembles a Festool Sander and stands approximately 6.5" tall and 11" wide. The LED lights in the base can cycle through seven different...
$39.95
$34.95
Dock Plate Stop
The Seneca Woodworking Dock Plate Stop works with our Dock Plate XL to accurately locate your workpiece for mortising. The Dock Plate XL can be used with up to three stops at a time (one is normally included with the Dock...
$19.95
$14.95
Dock Plate XL
Note: Imperial Dock Plates are shipping with approximately a 2-3 week leadtime. The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless....
from $117.94
Domi-Shim™
The Seneca Woodworking Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all...
$36.95
Domiplate XL for 1/2" and 3/4" Ply
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE. The Seneca Woodworking Domiplate XL™ is a fixed fence solution designed for the Festool Domino XL (DF 700) mortising tool. It allows quick adjustment for the...
from $109.95
Domiplate™ for 1/2" and 3/4" nominal ply
The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for the repeatable...
$64.95
Domiplate™ for 5/8" and 7/8" thick material
The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for accurate and repeatable mortising...
$64.95
Imperial Fence Height Gauge V2 for Festool Domino XL
The Seneca Woodworking Imperial Fence Height Gauge Version 2 (V2) for the Domino XL / DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to a variety of imperial dimensions without the need for a separate...
from $34.95
Imperial Offset Shims for Domiplate
This set of imperial offset shims allows the offset of the Domiplate and Domiplate XL to be changed from 1/32"-7/32" for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
$49.95
from $44.95
Imperial Thickness Gauge for Domino DF500
The Seneca Woodworking Imperial Thickness Gauge for the Domino DF500 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than a minute...
$54.95
Imperial Thickness Gauge for Festool Domino XL DF 700
The Seneca Woodworking Imperial Thickness Gauge for the Festool Domino DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than...
$54.95
Imperial Thickness Set for Festool Domino XL DF700
The Seneca Woodworking Imperial Thickness Set for the Festool Domino DF700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a range of imperial material thicknesses from 1/2" to 1". The set consists of...
$89.95
Large Dock Plate Stop
The Seneca Woodworking Large Dock Plate Stop Is a larger version of the standard stop that comes with our Dock Plate XL. This stop is both wider and taller than the standard stop, providing a larger surface for referencing workpieces...
$24.95
Mesh Back Trucker Hat
Represent Seneca Woodworking with this awesome Twill Back Trucker Hat!
Embroidered locally in Clarion, PA, USA.
Front: 60% Cotton, 40% Polyester
Back: 100% Polyester
$25.00
$19.99
Metric Domiplate™ for 12mm and 18mm
The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for the repeatable...
$64.95
Metric Offset Shims for Domiplate
This set of metric offset shims allows the offset of the Domiplate and Domiplate XL to be changed from 1-4.5mm for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them to...
$34.95
from $24.95
Metric Small Mortise Set
The kit includes our RTS-500 Cutter Adapter for using DF500 cutters on your DF700, along with our 10mm "Domi-Shim™". The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and...
$104.95
Parallel Guide System for Festool and Makita Track Saw Guide Rail (With Incra T-Track)
The Seneca Woodworking Parallel Guide System is a set of precision-machined aluminum components that mount to your track saw guide rail and enable the making of consistent sized repetitive rip cuts. The Parallel Guide System acts as a rip fence /...
$224.95