DF700 Accessories
0" Offset Domiplate™ XL ("Zero Offset Domiplate XL")
The Seneca Woodworking Domiplate XL™ is our best selling fence solution designed for the Festool Domino XL DF 700 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and...
$129.95
10mm Domi-Shim™
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust...
$49.95
45 Degree Dock Plate Stop
The Seneca Woodworking 45 degree Dock Plate Stop works with our Dock Plate XL to make mortising 45 degree trim pieces a breeze. This stop is a fixed 45 degree angle and comes in a "right" and "left" version, or...
from $27.95
Dock Plate Stop
The Seneca Woodworking Dock Plate Stop works with our Dock Plate XL to accurately locate your workpiece for mortising. The Dock Plate XL can be used with up to three stops at a time (one is normally included with the Dock...
$19.95
Dock Plate XL
The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless. It attaches to both the Festool Domino df 500 and Domino XL df...
from $127.94
Domi-Shim™
The Seneca Woodworking Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all...
$49.95
Domino Trim Plate
We saw this tool on Instagram from our friends over at DFM Toolworks and wanted one for ourselves, but after seeing it was out of stock on their website, we talked them into making a batch just for our customers! ...
$64.95
Domiplate Offset Shim Soft Case
Keep your Domiplate Offset Shims safe and neatly organized in our soft case! This accordion style case has 3 slots for our sets of 3 shims, but they even have enough space to hold multiple sets of shims!
$14.95
Domiplate XL Foam Storage Insert for Sys 3 Systainer (For Domiplate™ XL and Domiplate Offset Shims)
$39.95
Domiplate XL Foam Storage Insert for Sys 3 Systainer (For Domiplate™ XL and Domiplate Offset Shims)
Keep your Domiplate XLs protected and organized with our Domiplate XL Foam Storage Insert! This insert fits any Sys 3 M Systainer and has place to store two Domiplate XLs and multiple sets of Domiplate Offset Shims in their protective...
$39.95
Domiplate™ XL for 1/2" and 3/4" Ply
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE. The Seneca Woodworking Domiplate XL™ is a fixed fence solution designed for the Festool Domino XL (DF 700) mortising tool. It allows quick adjustment for the...
from $129.95
Domiplate™ XL for 12mm and 18mm ply
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE. The Seneca Woodworking Domiplate XL™ is a fixed fence solution designed for the Festool Domino XL (DF 700) mortising tool. It allows quick adjustment for the repeatable...
from $129.95
Imperial Fence Height Gauge V2 for Festool Domino XL
The Seneca Woodworking Imperial Fence Height Gauge Version 2 (V2) for the Domino XL / DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to a variety of imperial dimensions without the need for a separate...
from $34.95
Imperial Offset Shims™ for Domiplate
This set of Imperial Offset Shims™ allows the offset of the Domiplate and Domiplate XL to be changed from 1/32"-7/32" for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $54.95
Imperial Thickness Gauge for Festool Domino XL DF 700
The Seneca Woodworking Imperial Thickness Gauge for the Festool Domino DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than...
$34.95
Imperial Thickness Set for Festool Domino XL DF700
The Seneca Woodworking Imperial Thickness Set for the Festool Domino DF700 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a range of imperial material thicknesses from 1/2" to 1". The set consists of two...
$99.95
Large Dock Plate Stop
The Seneca Woodworking Large Dock Plate Stop Is a larger version of the standard stop that comes with our Dock Plate XL. This stop is both wider and taller than the standard stop, providing a larger surface for referencing workpieces...
$24.95
Metric Offset Shims™ for Domiplate
This set of Metric Offset Shims allows the offset of the Domiplate and Domiplate XL to be changed from 1-4.5mm for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $24.95
Metric Small Mortise Set
The kit includes our RTS-500 Cutter Adapter for using DF500 cutters on your DF700, along with our 10mm "Domi-Shim™". The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and...
$104.95
Mortise Center Finders for Festool Domino
Mortise Center Finders are a quick and easy way to find the center of a mortise location so that center point can be used for layout or for transferring mortise locations to another workpiece. Have you ever forgotten to...
$34.95
Mortise Depth Spacer for Domino XL DF700
If you use our Small Mortise Kit on the Domino XL DF 700, you've probably noticed that the lowest setting on the Domino XL plunge depth gauge is 15mm. This can be a problem if you're making a mortise in...
$29.95
RTS-500 Cutter Adapter for Festool Domino DF 700
The RTS-500 Cutter Adapter is a precision-machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only...
$69.95
Seneca Woodworking Small Mortise Kit for Festool Domino XL DF700
Note, we expect the small mortise kit to restock around 4/20/2024 The Seneca Woodworking Small Mortise Kit bundles three of our most popular products together in one convenient kit that allows you to make mortises as small as 4mm...
$149.95
Tanos Sys3 M112 Systainer
Tanos Sys3 M112 size Systainer. This Systainer is the ideal size to use with the cnc cut foam inserts we sell for our tools.
$73.00