Domino Accessories
0" Offset Domiplate™ XL ("Zero Offset Domiplate XL")
The Seneca Woodworking Domiplate XL™ is our best selling fence solution designed for the Festool Domino XL DF 700 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and...
$129.95
0" Offset Philip Morley Domiplate™ ("Zero Offset Domiplate")
The Seneca Woodworking Domiplate™ is our best selling fixed fence solution designed for the Festool Domino DF 500 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and greatly...
$74.95
10mm Domi-Shim™
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust...
$49.95
45 Degree Dock Plate Stop
The Seneca Woodworking 45 degree Dock Plate Stop works with our Dock Plate XL to make mortising 45 degree trim pieces a breeze. This stop is a fixed 45 degree angle and comes in a "right" and "left" version, or...
from $27.95
Blemish 0" Offset Philip Morley Domiplate™
We have a few 0" Offset Philip Morley Domiplates™ in inventory that were produced with cosmetic blemishes and as a result didn't meet our strict quality standards. These blemishes are purely cosmetic and include inconsistent surface finish or inconsistency in...
$74.95
$59.95
Blemish Domiplate™ Foam Storage Insert
We have a few Domiplate™ Foam Storage Inserts in inventory that were produced with cosmetic blemishes and as a result didn't meet our strict quality standards. These blemishes are purely cosmetic. Otherwise, these foam inserts are still 100% functional and...
$39.95
$19.95
Blemish Domiplate™ for 1/2" and 3/4" nominal ply
We have a few Domiplates™ in inventory that were produced with cosmetic blemishes and as a result didn't meet our strict quality standards. These blemishes are purely cosmetic and include inconsistent surface finish or inconsistency in the anodize color. Otherwise,...
$74.95
$59.95
Blemish Domiplate™ for 5/8" and 7/8" thick material
We have a few Domiplates™ in inventory that were produced with cosmetic blemishes and as a result didn't meet our strict quality standards. These blemishes are purely cosmetic and include inconsistent surface finish or inconsistency in the anodize color. Otherwise,...
$74.95
$59.95
Blemish Domiplate™ XL Foam Storage Insert
We have a few Domiplate™ XL Foam Storage Inserts in inventory that were produced with cosmetic blemishes and as a result didn't meet our strict quality standards. These blemishes are purely cosmetic. Otherwise, these foam inserts are still 100% functional...
$39.95
$19.95
Blemish Imperial Offset Shims™ for Domiplate
We have a few sets of Imperial Offset Shims in inventory that were produced with cosmetic blemishes and as a result didn't meet our strict quality standards. These blemishes are purely cosmetic and may include inconsistent surface finish. Otherwise, these...
$44.95
$39.95
Dock Plate Stop
The Seneca Woodworking Dock Plate Stop works with our Dock Plate XL to accurately locate your workpiece for mortising. The Dock Plate XL can be used with up to three stops at a time (one is normally included with the Dock...
$19.95
Dock Plate XL
The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless. It attaches to both the Festool Domino df 500 and Domino XL df...
from $127.94
Domi-Shim™
The Seneca Woodworking Domi-Shim™ is a machined aluminum shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all...
$49.95
Domino Trim Plate
We saw this tool on Instagram from our friends over at DFM Toolworks and wanted one for ourselves, but after seeing it was out of stock on their website, we talked them into making a batch just for our customers! ...
$64.95
Domiplate Exchange Program
If you purchased an original Domiplate directly from Ron Wenner (prior to the launch of this Seneca Woodworking site) and would like the anodizing and laser engraving of the new Domiplate model, we have created an exchange program. Here's...
$20.00
Domiplate Foam Storage Insert for Sys 3 Systainer (For Domiplate™ and Domiplate Offset Shims)
$39.95
Domiplate Foam Storage Insert for Sys 3 Systainer (For Domiplate™ and Domiplate Offset Shims)
Keep your Domiplates protected and organized with our Domiplate Foam Storage Insert! This insert fits any Sys 3 M Systainer and has place to store two Domiplates and multiple sets of Domiplate Offset Shims in their protective storage case. ...
$39.95
Domiplate XL Foam Storage Insert for Sys 3 Systainer (For Domiplate™ XL and Domiplate Offset Shims)
$39.95
Domiplate XL Foam Storage Insert for Sys 3 Systainer (For Domiplate™ XL and Domiplate Offset Shims)
Keep your Domiplate XLs protected and organized with our Domiplate XL Foam Storage Insert! This insert fits any Sys 3 M Systainer and has place to store two Domiplate XLs and multiple sets of Domiplate Offset Shims in their protective...
$39.95
Domiplate™ for 1/2" and 3/4" nominal ply
The Domiplate is for the Domino DF500. For the Domino XL DF700 version, click HERE. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for the repeatable...
$74.95
Domiplate™ for 5/8" and 7/8" thick material
The Domiplate is for the Domino DF500. The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for accurate and repeatable mortising of 5/8" or 7/8" thick material by...
$74.95
Domiplate™ XL for 1/2" and 3/4" Ply
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE. The Seneca Woodworking Domiplate XL™ is a fixed fence solution designed for the Festool Domino XL (DF 700) mortising tool. It allows quick adjustment for the...
from $129.95
Domiplate™ XL for 12mm and 18mm ply
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE. The Seneca Woodworking Domiplate XL™ is a fixed fence solution designed for the Festool Domino XL (DF 700) mortising tool. It allows quick adjustment for the repeatable...
from $129.95
Imperial Fence Height Gauge V2 for Festool Domino XL
The Seneca Woodworking Imperial Fence Height Gauge Version 2 (V2) for the Domino XL / DF 700 allows you to quickly and effortlessly adjust the Domino fence offset to a variety of imperial dimensions without the need for a separate...
from $34.95
Imperial Offset Shims™ for Domiplate
This set of Imperial Offset Shims™ allows the offset of the Domiplate and Domiplate XL to be changed from 1/32"-7/32" for even more versatility! The offset can be changed incrementally by stacking multiple shims. Mounting slots in the shims allow them...
from $54.95
Imperial Thickness Gauge for Domino DF500
The Seneca Woodworking Imperial Thickness Gauge for the Domino DF500 allows you to quickly and effortlessly adjust the Domino fence offset to center your mortise on a variety of imperial material thicknesses. The gauge installs in less than a minute...
$34.95